IBM THINKPAD 92P1836 Manuale Utente Scaricare il pdf (Pagina 2)

Tighten screws as follows:

v Plastic to plastic

Turn an additional 90 degrees after the screw head

touches the surface of the plastic part:

90 degrees more

(Cross-section)

v Logic card to plastic

Turn an additional 180 degrees after the screw head

touches the surface of the logic card:

180 degrees more

(Cross-section)

v Torque driver

If you have a torque driver, refer to the “Torque” column

for each step.

v Make sure you use the correct screw. If you have a

torque screwdriver, tighten all screws firmly to the torque

shown in the table. Never use a screw that you

removed. Use a new one. Make sure the screws are

tightened firmly.

1 2 3 4 5 6 7 ... 15 16

Nessun commento

IBM THINKPAD 92P1836 Manuale Utente Pagina 2